i would not try to remove an glue the sensor again. There must be another opportunity to set the offset. I guess if you remove it you'll destroy it.
I am missing some kind of guide how to calibrate the sensor to. I once pressed the…"
i had some trouble with the IMU too. In the end i made it working. However, i am not really sure if it works properly at the moment.
I give you a small list of posts and threads which helped me a lot during progress.
thanks for answering, the servo is connected to pingroup 6. Before i uploaded the new image it was working. However in the A Position (straight forward) it was jittering.
is there a way to measure if the command is going through…"
"I also upgraded to 2.5-05 - After some trouble i got everything to work. Except the servo does not move even though the regulation is shown in the cockpit.
Do you know what might be the problem?
Also the IMU depth seems to not work. However, i did…"
"i was waiting for this kind of guide. Even though the connection of the sensor is nearly self-explaining it shows best practice. Thanks!
The guide seems to be some kine of hidden on http://openrov.dozuki.com/Guide.
I cant see any link to it. Might…"