Onboard Electronics (158)

Discussions Replies Latest Activity

Max volts the main board can handle

I'm building a slightly larger version of the OPENROV. I'm using the standard electronics but with beefed up ESCs to run the new motors. I…

Started by Robin Muir

1 2 hours ago
Reply by Walt Holm

6 extra grey wires (TP20-TP25) 2.7 build add-ons

Hello, What kind of hardware could I connect to the extra 6 grey wires?  Servos?  What is the communication protocol?  I2C? -Andy

Started by Andrew Lynn

5 Jan 21
Reply by Andrew Lynn

Gamepads Compatibilities for a ASUS laptop with Windows 8.1 (OpenROV 2.7)

Hi there, we are wondering if for the OpenROV 2.7, we can use these both gamepads with my laptop (It's an ASUS running with Windows 8.1)? h…

Started by Dorian

0 Jan 13

Rov offline,

Dear Fellows, with hello, I tell them we have a problem. Our ROV stopped having communication with the computer. apparently it is not worki…

Started by Mauricio Reyes

4 Jan 12
Reply by Mauricio Reyes

Missing Humidity Sensor (Sens1) [HIH5031] on my controller board Ver 2.6

Hello, I have noticed that on my controller board Ver 2.6 I am missing the humidity sensor HIH5031. Did all 2.6 Versions come without this…

Started by carsten

3 Jan 8
Reply by Walt Holm

Tenda Homeplug adapter P200 vs. P1000

Hello, on the weekend I have tried to work on my Tenda homeplug adapter. Over the Christmas vacation I had bought a Tenda homeplug in Euro…

Started by carsten

1 Jan 8
Reply by Walt Holm

OpenROV Controller Board Rev2.6

Greetings all from Vancouver Island. Happy New Year 2015. Been watching the progress of this OPENROV project for some time. Early last year…

Started by Shaughan Holden

10 Jan 5
Reply by Henk the Knife

IMU error with 2.5.1-101 version

Installed the 2.5.1-101 software version without any issue and updated the Arduino on the ROV.  Now the compass/tilt etc is not working, t…

Started by Kjetil

13 Jan 3
Reply by Kjetil

Compass of IMU module giving same values in all 3 directions

I was testing the compass of IMU. For simplicity I was using code for MPU9150 on Arduino website: http://playground.arduino.cc/Main/MPU-915

Started by Pratap Bhanu Solanki

0 Dec 30, 2014

Stuck on first power up

Hi all! My team and I are trying to get to the cockpit. I've changed my adapter settings: The topside interface board look like this (P…

Started by Thais Cavalcanti Correia

4 Dec 3, 2014
Reply by Thais Cavalcanti Correia

RSS

© 2015   Created by Eric Stackpole.   Powered by

Badges  |  Report an Issue  |  Terms of Service